I am trying to using multiple IP's that are allocated to me to control SSL connections to multiple sites.
Router - Cisco 871
IP1 - 72.29.239.x
IP2 - 72.29.239.y
I am trying to redirect traffic on 72.29.239.y to a server which is listening on port 443 for a certain site. 72.29.239.x is also listening on port 443 (but for different site). When I try to add a NAT translation, I get an error saying that the port 443 is already mapped, but the destination IP is different. Can anyone help me with this problem ? I would think it is a regular function that people use consistently.
My setup right now is I have one Vlan1 (192.168.0.x) which is bound to FastEthernet4 (my WAN port) 72.29.239.x which a subnet mask of 255.255.255.192 (set by ISP)
I am not sure if it is clear what I am trying to acheive. My ISP has given me a block of 5 IP's I want to add another IP on this router, so that port 80 coming in on IP x and IP y will point to the same machine, but to a different virtual server, as defined by apache. If they are required to be on different machines (I would assume the rotuer would be able to filter traffic by IP incoming) I can also do that. Look forward to any replies... Desperate to get this working really.
I am not sure which single server you are speaking of, perhaps .103 ?
What I am trying to acheive is to route traffic which comes in on Port 80 from IP address 188.8.131.52 to redirect to .103, but the SDM will not allow me to add that NAT translation because it has seen port 80 already, do I have to route traffic to a different server on the LAN for this to work as I would like?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.