I hope you are fine, I have worked in the past with some DSL cases, in which the DSL modem was not able to sync with some british or german DSLAMS. I was wondering if you have tried to hardcode the dsl operating mode from the ATM interface. (sometimes when you leave it as auto, the chipset is not able to sync with the DSLAM)
interface ATM0 dsl operating-mode auto
If that does not fix the issue. I strongly suggest you change the firmware from the chipset, sometimes you need to upgrade, sometimes to downgrade, I know it sounds hard I made these things on the past and they can be a pain. I dont believe that changing the IOS on the router could fix it. Please let me know.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.