Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 876

Hi,

Please tell me how to configure Fast ethernet ports in 876 router.

Unable to assign ip address to the ethernet prots.

sh ip int outputs

FastEthernet0 is up, line protocol is down

Internet protocol processing disabled

FastEthernet1 is up, line protocol is down

Internet protocol processing disabled

FastEthernet2 is up, line protocol is down

Internet protocol processing disabled

FastEthernet3 is up, line protocol is down

Internet protocol processing disabled

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Cisco 876

Hi,

Assign each interface to a specific vlan then configure the IP address under the SVI interface:

1.Create the VLAN:

vlan database

vlan x

exit

2.Assign an interface to a VLAN:

interface fastethernetx

switchport access vlan x

Assign an IP to the SVI interface:

3.interface vlan x

ip address x.x.x.x x.x.x.x

HTH,

Mohammed Mahmoud.

3 REPLIES

Re: Cisco 876

Hi,

Assign each interface to a specific vlan then configure the IP address under the SVI interface:

1.Create the VLAN:

vlan database

vlan x

exit

2.Assign an interface to a VLAN:

interface fastethernetx

switchport access vlan x

Assign an IP to the SVI interface:

3.interface vlan x

ip address x.x.x.x x.x.x.x

HTH,

Mohammed Mahmoud.

New Member

Re: Cisco 876

Thank you it worked.

Re: Cisco 876

Hi,

You are very welcomed, and thank you for using the rating system.

HTH,

Mohammed Mahmoud.

240
Views
0
Helpful
3
Replies