Dear All,
Below is the configuration which connects (PPP light comes) but no browsing.
01.Please corret me if any mistake in configuration (pls reply with which command to remove or which to add)
also the ios version is old ( version version 12.4 )
or some bugs or some hardware issue?
02. I beleive if the configuration below is correct then if i upgrade the ios to latest stable version then i hope things
will work fine? Which stable latest version is feasible? please advise.Also will cisco give it FREE of cost?
03.Is it true that if the router that we bought could be refurbished and then issue could be with hardware or software etc?
04.How should i Check that router is not refurbished?
05.The same below configuration is working fine on other router of same model/same ios , if I not wrong.
Thanx to all in advance.Happy new year!
User Access Verification
Username: khan
Password:
shukry#show ip int br
Interface IP-Address OK? Method Status Protocol
ATM0 unassigned YES NVRAM up up
ATM0.1 unassigned YES unset up up
Dialer0 2.88.225.150 YES IPCP up up
FastEthernet0 unassigned YES unset up up
FastEthernet1 unassigned YES unset up up
FastEthernet2 unassigned YES unset up down
FastEthernet3 unassigned YES unset up up
NVI0 unassigned YES unset administratively down down
Virtual-Access1 unassigned YES unset up up
Vlan1 192.168.1.254 YES NVRAM up up
shukry#show run
Building configuration...
Current configuration : 3770 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname shukry
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
!
crypto pki trustpoint TP-self-signed-985750308
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-985750308
revocation-check none
rsakeypair TP-self-signed-985750308
!
dot11 syslog
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
ip dhcp excluded-address 192.168.1.1
ip dhcp excluded-address 192.168.1.254
!
ip dhcp pool khan
import all
network 192.168.1.0 255.255.255.0
default-router 192.168.1.254
dns-server 8.8.8.8 8.8.4.4
domain-name wr
lease 0 2
!
!
no ip domain lookup
ip domain name yourdomain.com
!
!
!
username khan privilege 15 secret xxxxxxxxxxxx
!
!
archive
log config
hidekeys
!
!
!
!
!
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
pvc 0/35
pppoe-client dial-pool-number 1
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 192.168.1.254 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
!
interface Dialer0
ip address negotiated
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap chap callin
ppp chap hostname user@16m.saudi.net.sa
ppp chap password 1234
ppp pap sent-username user@16m.saudi.net.sa password 1234
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
!
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 1 interface Dialer0 overload
!
access-list 1 permit 192.168.1.0 0.0.0.255
no cdp run
!
!
!
control-plane
!
!
line con 0
privilege level 15
login local
no modem enable
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet ssh
!
scheduler max-task-time 5000
end
shukry#
