cisco 877

[babejdid]

Which ios version will fit in to get adsl work properly facing a Lucent card ?

Or what option do I need to add in the config? I have already tried dsl operating mode ansi-dmt !!!

Thanks in advance.

[Wilson Samuel]

Hi,

This is a sample config which is a working config.

interface ATM0/0

no ip address

no atm ilmi-keepalive

pvc 8/35

pppoe-client dial-pool-number 1

!

dsl operating-mode auto

!

!

interface Dialer1

mtu 1200

ip address negotiated

no ip redirects

encapsulation ppp

dialer pool 1

dialer-group 1

ppp authentication chap callin

ppp chap hostname gmaccom

ppp chap password 7 1049041806141D065D

Please, paste your existing config, and we can help you to fix the same.

Kind Regards,

Wilson Samuel

[babejdid]

Here is my sample config.But remember my card

connected in the co is Lucent ... not Alcatel.

ios bin file is c870-advipservicesk9-mz.124-4.T1.bin

interface ATM0

mtu 1490

no ip address

no ip redirects

no ip proxy-arp

no ip route-cache cef

no ip route-cache

no ip mroute-cache

no atm ilmi-keepalive

bundle-enable

dsl operating-mode auto

hold-queue 224 in

!

interface ATM0.1 point-to-point

no ip route-cache

no ip mroute-cache

pvc 0/35

pppoe-client dial-pool-number 1

!

interface Dialer1

mtu 1490

ip address negotiated

no ip redirects

no ip unreachables

ip virtual-reassembly

encapsulation ppp

no ip route-cache cef

no ip route-cache

no ip mroute-cache

dialer pool 1

dialer-group 1

no cdp enable

ppp authentication pap callin

ppp pap sent-username xxxxxx password xxxxx

!

Thanks for your help.