Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco 877W to Cisco C887VA-W-A-K9

Hi all,

I'm replacing an 877W router with an C887VA-W-A-K9.

The new router uses the service module for managing the AP independantly - So I know I can't simply paste the config accross from the old one.

The current router is connected to an ISP with a VPN back to the head office router. DHCP is supplied from the router and clients connect to that via wireless.

I know I can type most of the commands in - but what is best practice going from an all-in-one to having a separate AP? What order should thing be entered?

I look forward to your thoughts?

1 REPLY
Hall of Fame Super Gold

Re: Cisco 877W to Cisco C887VA-W-A-K9

I think many people use the AP GUI to configure it. To be honest with you I don't know how it's accessed.

Of course you can also use the CLI for that and paste the relevant commands in there, reviewing them first with an editor.

So I guess your first decision is what you want to use.

309
Views
0
Helpful
1
Replies
CreatePlease to create content