Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 878 dsl controller configuration

Hi

I have a SDSL G.DMT service with Zen.

We have purchased an 878 and put a basic config on it.

It refuses to show even a CD led when connected up to the copper wire.

Has anyone got a sample config for the controller which shows all the lines needed to get a carrier detect from a UK supplier.

cheers

Steve

ps currently using a Speedtouch 605s, so the SDSL does work, but 'cos we cant get NAT off it, we decided to put a Cisco box in to replace.

1 REPLY

Re: Cisco 878 dsl controller configuration

Hello Steve,

Please refer to this URL:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/85x87x/857swcg/eng/preface.htm

it has all the configurations possible with a 878 router.. u need to look at the PPPoE or PPPoA config...

Hope this helps..

Raj

716
Views
0
Helpful
1
Replies