Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 878 restarting during config

Hi Guys,

               I have a peculiar isse, when I try to configure the controller dsl interface on 878, it starts restarting, it is actually running the latest IOS , any advice would be helpful, here's the output.

Router(config-controller)#mode at

Router(config-controller)#mode atm ?

  <cr>

Router(config-controller)#mode atm

Router(config-controller)#

System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2006 by cisco Systems, Inc.

C870 series (Board ID: 5-148) platform with 131072 Kbytes of main memory

Booting flash:c870-advipservicesk9-mz.124-24.T7.bin

Self decompressing the image : ############################################################################################ [OK]

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.

           170 West Tasman Drive

           San Jose, California 95134-1706

Regards

Krishna

  • WAN Routing and Switching
Everyone's tags (2)
6 REPLIES

Cisco 878 restarting during config

Hi ,

Can you post show ver , also can you check the flash for any crash file

Dan

Hall of Fame Super Gold

Cisco 878 restarting during config

Not latest IOS, update it.

New Member

Cisco 878 restarting during config

c870-advipservicesk9-mz.124-24.T7.bin Isn't this the latest IOS version, do I have to go for

15.1.4M3(MD)????

Regards

Krishna

Hall of Fame Super Gold

Cisco 878 restarting during config

15.0M o 15.1M.

New Member

Cisco 878 restarting during config

The Current DRAM is 128 MB and the flash is 28 MB, but for 15.0M or 15.1M we need 192MB and 32MB DRAM and flash respectively, is ther any other work around for this???

Regards

Krishna

Hall of Fame Super Gold

Cisco 878 restarting during config

Buy the RAM, it's cheap.

644
Views
0
Helpful
6
Replies
This widget could not be displayed.