11-20-2010 02:41 PM - edited 03-04-2019 10:31 AM
Hi,
I have a Cisco 881 router and I can access it using the CCP 2.3. With this router I can surf internet with no problem and I want to replace it with my old router Linksys WRT54GS, but I need to open this ports on the 881:
Linksys WRT54GS configuration under -Applications & Gaming - Port Range Foward:
Application Start End Protocol IP Address
Apache 80 80 Both 1.100.100.240 (this is our web server ip)
MySQL 3306 3306 Both 1.100.100.240
FTP 21 21 Both 1.100.100.240
SSH 22 22 Both 1.100.100.240
Can anyone pls tell me how to set up the 881 to do the same as my WRT54GS? Any help is apprecciated. Thks.
ENRICO
Solved! Go to Solution.
11-22-2010 06:12 AM
hi,
take a look here:
http://www.cisco.com/en/US/products/ps9422/products_configuration_example09186a0080b2f103.shtml
11-21-2010 04:27 AM
Hi Enrico,
if you can connect to router with telnet, you can use configuration below.
for example;
wan ip = x.x.x.x
#conf t
11-22-2010 06:06 AM
Hi Muammer,
Tks for the hint, but I would prefer to do any set up using the Cisco Configuration Professional version 2.3 wich I have running in my desktop. I'm trying to understand this software also because I plan to use another 881 (different location) and as far as I know with this software I can manage remotely both routers.
Pls let me know if you have an idea how to set uo ports range using the Cisco software.
Sincerely,
ENRICO
11-22-2010 06:12 AM
hi,
take a look here:
http://www.cisco.com/en/US/products/ps9422/products_configuration_example09186a0080b2f103.shtml
11-22-2010 09:33 AM
Hi,
Tks very much. I´m going to try asap. This document looks very good. Cisco rocks!
ENRICO
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide