07-23-2013 06:27 AM - edited 03-04-2019 08:31 PM
Good morning,
while configuring a CISCO-888-EA-K9, I encountered the following problem:
Router(config)#router bgp 65000
Protocol not in this image
The router is originally equipped with the image: c800-universalk9-mz.SPA.152-4.M3.bin
I tried also: c800-universalk9-mz.SPA.153-2.T.bin
without results.
I would appreciate any cooperation in resolving this issue.
Cordially
Solved! Go to Solution.
07-23-2013 07:12 AM
What license does the router have? I suspect this will be a licensing rather than IOS issue. You'll need the advanced IP services license for the router for BGP to work.
07-23-2013 07:22 AM
Hi,
you'll need 15.3(2)T or higher with the Advanced IP services.
Regards
Alain
Don't forget to rate helpful posts.
07-23-2013 07:33 AM
I checked the Cisco Feature Navigator and it agrees that for the 888 you need the Advanced IP Services license.
HTH
Rick
07-23-2013 07:12 AM
What license does the router have? I suspect this will be a licensing rather than IOS issue. You'll need the advanced IP services license for the router for BGP to work.
07-23-2013 07:22 AM
Hi,
you'll need 15.3(2)T or higher with the Advanced IP services.
Regards
Alain
Don't forget to rate helpful posts.
07-23-2013 07:33 AM
I checked the Cisco Feature Navigator and it agrees that for the 888 you need the Advanced IP Services license.
HTH
Rick
07-23-2013 08:05 AM
I thank you all for providing such a fast response.
I'll contact my Cisco account for the license needed..
Greetings
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: