Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco ASR1002 Chassis,4 built-in GE, Dual P/S,4GB DRAM support 1000BASE-T SFP (NEBS 3 ESD) or not?

Dear All,

I want to confirm with you that i want to buy modul 1000BASE-T SFP (NEBS 3 ESD) (P/N: SFP-GE-T) 4 unite for install to Cisco router ASR 1002

but i don't know Cisco ASR 1002 (P/N: ASR1002) can support module SFP-GE-T or not .

Could you help me on this?

Best Regards,

Rechard

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Cisco ASR1002 Chassis,4 built-in GE, Dual P/S,4GB DRAM suppo

SFP-GE-T is supported on the ASR1002 with firmware XE 2.1.

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html#wp131775

Don't forget to rate useful posts.  Thanks.

2 REPLIES
Hall of Fame Super Gold

Re: Cisco ASR1002 Chassis,4 built-in GE, Dual P/S,4GB DRAM suppo

SFP-GE-T is supported on the ASR1002 with firmware XE 2.1.

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html#wp131775

Don't forget to rate useful posts.  Thanks.

Hall of Fame Super Gold

Re: Cisco ASR1002 Chassis,4 built-in GE, Dual P/S,4GB DRAM suppo

Thanks for the rating.

1353
Views
0
Helpful
2
Replies