Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco ASR1004 bvi and bridge-group missing in ATM port

Hi,

   I tried to use bvi interface on ASR 1004 but it wasn't successfull..

my company use cisco7206 now, will changed ASR1004 , but in ASR1004 these commond missing.

i heard asr 1000 series does not support bvi interfaces,can use bdi?

who can tell me , how it is use this bdi in ATM port or bvi config in ASR 1004

i used ios code:

asr1000rp1-adventerprisek9.03.07.03.S.152-4.S3.bin

commond:

bridge irb

bridge 1 route ip

bridge 1 protocol ?

1111(config)#bridge 1 protocol ?

  dec          DEC protocol

  ibm          IBM protocol

  vlan-bridge  vlan-bridge protocol

not ieee

interface ATM1/0/0

no ip address

ip directed-broadcast

no ip route-cache cef

load-interval 30

no atm ilmi-keepalive

no shut

!

interface ATM1/0/0.1 point-to-point

mtu 1500

bandwidth 6000

no ip redirects

no ip unreachables

no ip proxy-arp

ip accounting output-packets

bridge-group 3                       //can't config

pvc SSS 0/105

  protocol ip 192.168.1.2 broadcast

  ubr 6000

  encapsulation aal5snap

no shut

!

interface BVI3                              //this interface bvi can't config

description << To sss >>

mtu 1500

bandwidth 6000

ip address 192.168.1.1 255.255.255.0

no ip redirects

no ip unreachables

no ip proxy-arp

ip tcp adjust-mss 1300

load-interval 30

no shut

plz,help

thanks

Everyone's tags (4)
183
Views
0
Helpful
0
Replies