Hi,
I tried to use bvi interface on ASR 1004 but it wasn't successfull..
my company use cisco7206 now, will changed ASR1004 , but in ASR1004 these commond missing.
i heard asr 1000 series does not support bvi interfaces,can use bdi?
who can tell me , how it is use this bdi in ATM port or bvi config in ASR 1004
i used ios code:
asr1000rp1-adventerprisek9.03.07.03.S.152-4.S3.bin
commond:
bridge irb
bridge 1 route ip
bridge 1 protocol ?
1111(config)#bridge 1 protocol ?
dec DEC protocol
ibm IBM protocol
vlan-bridge vlan-bridge protocol
not ieee
interface ATM1/0/0
no ip address
ip directed-broadcast
no ip route-cache cef
load-interval 30
no atm ilmi-keepalive
no shut
!
interface ATM1/0/0.1 point-to-point
mtu 1500
bandwidth 6000
no ip redirects
no ip unreachables
no ip proxy-arp
ip accounting output-packets
bridge-group 3 //can't config
pvc SSS 0/105
protocol ip 192.168.1.2 broadcast
ubr 6000
encapsulation aal5snap
no shut
!
interface BVI3 //this interface bvi can't config
description << To sss >>
mtu 1500
bandwidth 6000
ip address 192.168.1.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip tcp adjust-mss 1300
load-interval 30
no shut
plz,help
thanks
