Cisco Cisco 877 VPN working, but only 2 laptops can use tunnel at a time
Hi, I have a Cisco 877 router in VPN mode to a Cisco 3015. The VPN is up and my first laptop is working fine over it. I have added a second and that seems fine, the 3rd however takes forever to logon and when it does it can ping everything (IP, DNS) over the VPN, but can't open Emails, Citrix eventhough they can ping them. I have tried 3 more PC and they are the same.
I had this error on the console is it related? And what debug commands can I run to see if the VNP is doing something?
Oct 11 14:06:49.748: %IP_VFR-4-FRAG_TABLE_OVERFLOW: Dialer1: the fragment table has reached its maximum threshold 16
Oct 11 14:52:36.618: %IP_VFR-4-FRAG_TABLE_OVERFLOW: Dialer1: the fragment table has reached its maximum threshold 16
Oct 11 14:52:36.666: %FW-4-TCP_OoO_SEG: Dropping TCP Segment: seq:3775764964 1500 bytes is out-of-order; expected seq:3775744524. Reason: TCP reassembly queue overflow - session 172.19.15.14:2182 to 192.168.21.20:80
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...