I have a DDR2200 just installed by Centurylink for a bonded pair DSL. It feeds my home network through a Netgear JGS524 Gigabit switch. The DDR2200 locks up at random times. A Centurylink tech told me that the switch was causing the 2200 to lock up. The 2200 has only four ports and I need a minimum of 16. He also told me that any switch would do this. Can anyone confirm this behavior and/or have a solution?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...