We have cisco catalyst 3560 which is normally connected to the corporate headquarter via ATM connection, as a backup we have also ADSL connection connected to the switch. If ATM connection dies, ADSL connection takes cares of the connectivity. This is how EIGRP works anyway. But my question: Is there any way when router can choose to switch traffic to the backup connection if it detects that primary link performance (slow connection, longer network latency) has gone bad? The other day we had situation where one of the primary links performance were terrible but still soho offices still using that primary path creating network bottleneck on the link. It would have been better it switches routed to the backup ADSL connection to share the load. Any idea?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...