Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco IOS Min. Memory for Routers

I assume this is the best place to post regarding IOS.  We are beginning the process of upgrading our IOS images on 1841 and 2811 series remote routers.  With the new 12.4.24.T2 code in advance enterprise the min. memory required is 256MB.  Our routers contain 239MB as ordered.  The code has loaded successfully on several test routers.  My concern is there any long term effects of being below Cisco's recommended memory for the code.

Since we are below the requirement, what commands and statistics would you all suggest watching closely to ensure the stability of the router with its internal processes.  The heaviest "load" we could put on the routers, config wise, will be with crypto maps, ZBF and WAAS

I look forward to your thoughts.

thank you

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Cisco IOS Min. Memory for Routers

Cisco 2811 (revision 53.51) with 247808K/14336K bytes of memory.

247 + 14 = 261mb

Cisco 1841 (revision 5.0) with 235520K/26624K bytes of memory.

235 + 26 = 261mb

6 REPLIES
Hall of Fame Super Gold

Re: Cisco IOS Min. Memory for Routers

Can you post a "sh ver" of both models of the routers please?

New Member

Re: Cisco IOS Min. Memory for Routers

Leo.....please see attached .txt for the sh ver.

thanks

Hall of Fame Super Gold

Re: Cisco IOS Min. Memory for Routers

Cisco 2811 (revision 53.51) with 247808K/14336K bytes of memory.

247 + 14 = 261mb

Cisco 1841 (revision 5.0) with 235520K/26624K bytes of memory.

235 + 26 = 261mb

New Member

Re: Cisco IOS Min. Memory for Routers

Thanks so much Leo for the info.  I guess I was looking at the NVRAM stats instead of the memory.  Learn something new everyday to look for!

thanks again

Hall of Fame Super Gold

Re: Cisco IOS Min. Memory for Routers

Glad to be of assistance.

Re: Cisco IOS Min. Memory for Routers

kenneth,   to add to leo's post ..

For future reference you can always look at  2800 ISR series specs  table.. found at http://www.cisco.com/en/US/prod/collateral/routers/ps5854/prod_qas0900aecd80169bd6.html

2800 series routers at least comes from factory with default memory listed in above link  ,  for the 2811 series default is 256MB,  and  maximun  RAM capacity of 768MB   , 2811 have two slots for adding more mem which may be a combination of ONE 256MB and ONE 512 to equal 768MB Max MEM.

In any given router you may  retrieve absolute memory size the device have by simple calc ,   from your 2811 sh ver output  Cisco 2811 (revision 53.51) with 247808K/14336K bytes of memory   [ simply add both figures   247808 + 14336  =  262144  devided by 1024 = 256  ]  which will give you 256MB .

  

Regards

508
Views
3
Helpful
6
Replies