Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco IOS Software Upgrade

I have a catalyst 2950 ver. 12.1 EA(48 SI) and intend to upgrade to the latest version of the software. But there have been Four different IOS IMAGE releases before the latesr one of 2008. My question is, DO I HAVE TO UPGRADE THE PREVIOUS FOUR RELEASES BEFORE THE NEW ONW OR WILL UPGRADING DIRECTLY TO THE 2008 NEW IMAGE Suffice?

2 REPLIES
Hall of Fame Super Bronze

Re: Cisco IOS Software Upgrade

You can upgrade directly to the intended IOS image, provided your hardware supports it (DRAM and Flash).

HTH,

__

Edison.

Re: Cisco IOS Software Upgrade

Hi,

You no need to upgrade one by one to get latest.
You can directly upgrade to latest IOS.

Please see the below link for step by step IOS upgradation procedures and concerned things before going to upgrade for 2950 switches.
http://www.cisco.com/en/US/products/hw/switches/ps628/products_configuration_example09186a0080169627.shtml#configure2


Please rate the helpfull posts.
Regards,
Naidu.

164
Views
0
Helpful
2
Replies
CreatePlease to create content