Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Linksys RV042 to Juniper SSG320 VPN - no traffic

I have a Linksys RV042 with gateway to gateway VPN established, all VPN tunnels are working, however for one endpoint (Juniper SSG320) I have two subnets that need to be reachable from the Linksys subnet.

Linksys Subnet 192.168.100.0/24

Juniper Subnet #1: 10.1.0.0/16

Juniper Subnet #2: 10.10.0.0/16

Both VPNs from the Linksys to the Juniper (#1 and #2) are connected, however I can only see traffic from 192.168.100.0 to 10.1.0.0, but not 192.168.100.0 to 10.10.0.0.

Any thoughts?

401
Views
0
Helpful
0
Replies
CreatePlease to create content