Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CISCO NEXUS 7000

Hi all. Can anyone help me how to configure Nexus 7000 Vrf Management for mgmt 0 to copy files from tftp? I even can not ping tftp server.

I think a problem is in wrong route of management vrf.

Thanks in advance

3 REPLIES
New Member

CISCO NEXUS 7000

mgmt 0 uses vrf management, not default.

Also you cannot use tftp with nexus, need to use sftp or usb thumb drive.

New Member

CISCO NEXUS 7000

Hi,

Just add a default route in the vrf management pointing to the management's network gateway.

vrf context management

  ip route 0.0.0.0/0 x.x.x.1

interface mgmt0

  vrf member management

  ip address x.x.x.10/24

New Member

Re: CISCO NEXUS 7000

I added a route also but I was again unable to ping.

then I tried to ping as follows "ping x.x.x.x vrf management" and it was successful . it seems that you can't ping from management vrf unless you write "vrf management" after ip address

finaly I found that problem was in incompatibility for tftp server

I used cisco kits tftp server then and solved the problem

thanks everybody

168
Views
0
Helpful
3
Replies
CreatePlease login to create content