Cisco Professional Configuration Issue with SG 500 52P
I have a new SG500-52P switch installed for a small business and am upgrading to a Cisco 2910 router this weekend. I am trying to view the new switch on CCPE but it keeps saying that the device is undiscoverable. I have HTTP and HTTPS enabled on the switch. Is this switch able to be used with CCPE? It is not a requirement because the web interface does work when I manually log on to the switch, but I was wanting to use CCPE for the router and switch if possible.
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...