Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

cisco router 800 series

I reseted the cisco router 800 series. All the configuration gone. May i know how to configure its ip back to 10.10.10.1? Thus, I can use SDM to configure the rest of settings.

I tried to configure its interface ip to 10.10.10.1 but it showed ip address may not be configured on L2 links.

Please kindly help.

5 REPLIES

Re: cisco router 800 series

You should be able to configure the address on interface BVI1.

HTH,

John

HTH, John *** Please rate all useful posts ***
New Member

Re: cisco router 800 series

how to do it?

Re: cisco router 800 series

You would need to console into the device with your console cable. You can use hyperterminal or putty to connect to the device.

HTH,

John

HTH, John *** Please rate all useful posts ***
New Member

Re: cisco router 800 series

What is the command?

Re: cisco router 800 series

The command for setting your ip address?

conf t

int bvi1

ip addr 10.10.10.1 255.255.255.0

Copy and paste the lines that are between and and paste them into your hyperterminal window.

HTH, John *** Please rate all useful posts ***
416
Views
0
Helpful
5
Replies