cisco RPM-B (NPE150) problem

[mohammedmahmoud]

Hi all,

i've a problem with my RPM:

It keeps on giving this message:

00:01:16: %RPM_VIRTUAL_PORT-3-VRTLINFO: Starting bulk updates ...

00:01:16: %RPM_VIRTUAL_PORT-3-VRTLINFO: ... Completed Bulk updates

00:01:45: %RPM_VIRTUAL_PORT-3-VRTLINFO: RSCPRTN_RESYNCH_TASK: Synch Check Started...

00:01:45: %RPM_VIRTUAL_PORT-3-VRTLINFO: RSCPRTN_RESYNCH_TASK: Synch Check Complete.

Plus it adds automatically this line in its running config:

boot system tftp rpm-js-mz.122-15.T5.bin 255.255.255.255

I need to use it in production, but i am afraid it would be faulty !?

Thanks.

[wdrootz]

The response may be due to following reasons.

1. The interface state may be changed from up to down

2.There may occured a router crash

3.The connection resyncronisation may be happened.

[mohammedmahmoud]

Hi William,

Thanks alot for the reply, but what about adding automatically this line in its running config when reloaded:

boot system tftp rpm-js-mz.122-15.T5.bin 255.255.255.255

Thanks in advance.