Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

cisco RPM-B (NPE150) problem

Hi all,

i've a problem with my RPM:

It keeps on giving this message:

00:01:16: %RPM_VIRTUAL_PORT-3-VRTLINFO: Starting bulk updates ...

00:01:16: %RPM_VIRTUAL_PORT-3-VRTLINFO: ... Completed Bulk updates

00:01:45: %RPM_VIRTUAL_PORT-3-VRTLINFO: RSCPRTN_RESYNCH_TASK: Synch Check Started...

00:01:45: %RPM_VIRTUAL_PORT-3-VRTLINFO: RSCPRTN_RESYNCH_TASK: Synch Check Complete.

Plus it adds automatically this line in its running config:

boot system tftp rpm-js-mz.122-15.T5.bin 255.255.255.255

I need to use it in production, but i am afraid it would be faulty !?

Thanks.

2 REPLIES
Bronze

Re: cisco RPM-B (NPE150) problem

The response may be due to following reasons.

1. The interface state may be changed from up to down

2.There may occured a router crash

3.The connection resyncronisation may be happened.

Re: cisco RPM-B (NPE150) problem

Hi William,

Thanks alot for the reply, but what about adding automatically this line in its running config when reloaded:

boot system tftp rpm-js-mz.122-15.T5.bin 255.255.255.255

Thanks in advance.

182
Views
0
Helpful
2
Replies
CreatePlease login to create content