Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Soho 97

Hi,

I have a problem with a Cisco Soho 97 which has been passed onto myself.

When I start the unit up I receive the Green OK led, and two flashing green RXD and TXD leds constantly.

I cannot connect to the web interface and I have tried to connect to the console which seems to work but stops on the last line and I cannot do anything.

I have posted an output of the console session.

I would be very appreciative if someone could give me some advise.

Regards

Kev

1 REPLY
Silver

Re: Cisco Soho 97

Console problems occur when the router becomes unresponsive to input at the console port. If the console is not responsive, it means that a high priority process prevents the console driver from responding to input. The default configuration selects the route processor (RP) in the lowest numbered slot. For the Cisco CRS-1 Multishelf System, the RP in the lowest numbered slot in the LCC configured as Rack 0 is selected as the primary RP and the designated shelf controller (DSC).

http://www.cisco.com/en/US/products/hw/routers/ps359/products_tech_note09186a0080106fd7.shtml

http://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.5/troubleshooting/guide/tr35boo.html#wp1044047

130
Views
0
Helpful
1
Replies