cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
252
Views
0
Helpful
1
Replies

Cisco Soho 97

kevincrookes
Level 1
Level 1

Hi,

I have a problem with a Cisco Soho 97 which has been passed onto myself.

When I start the unit up I receive the Green OK led, and two flashing green RXD and TXD leds constantly.

I cannot connect to the web interface and I have tried to connect to the console which seems to work but stops on the last line and I cannot do anything.

I have posted an output of the console session.

I would be very appreciative if someone could give me some advise.

Regards

Kev

1 Reply 1

drolemc
Level 6
Level 6

Console problems occur when the router becomes unresponsive to input at the console port. If the console is not responsive, it means that a high priority process prevents the console driver from responding to input. The default configuration selects the route processor (RP) in the lowest numbered slot. For the Cisco CRS-1 Multishelf System, the RP in the lowest numbered slot in the LCC configured as Rack 0 is selected as the primary RP and the designated shelf controller (DSC).

http://www.cisco.com/en/US/products/hw/routers/ps359/products_tech_note09186a0080106fd7.shtml

http://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.5/troubleshooting/guide/tr35boo.html#wp1044047

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card