Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco SOHO 97

have a bought a second hand Cisco SOHO 97 router and I have a problem with it. It's not possible for me to access the CRWS homepage when entering the URL http://10.10.10.1 in my browser. My NIC is configured to automaticaly receive an IP adresss from a DHCP server. In stead of receiving an address in the 10.10.10.x range, my IP adress is something like 192.168.1.64. What can I do to make it happen so I can access the CRWS and configure my router?

Thanks in advance...

Timothy Yzermans

4 REPLIES
Purple

Re: Cisco SOHO 97

Timothy,

It is possible that the router interface is configured with an address such as 192.168.1.1.

Can you try opening up http://192.168.1.1 ?

Pls do remember to rate posts.

Paresh

New Member

Re: Cisco SOHO 97

Hy,

you can connect with telnet, or with the consol cabel.

Use delet config function to set him back to factory defaults

New Member

Re: Cisco SOHO 97

and where do I have to enter the command delet config? at the command prompt or in some kind of program? thx in advance

New Member

Re: Cisco SOHO 97

no, that doesn't work. and my ip is a 169.x.x.x address wich means DHCP isn't working...

211
Views
0
Helpful
4
Replies