cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
618
Views
0
Helpful
1
Replies

Cisco stance of term frequency regarding SBE

Jim White
Level 1
Level 1

What does Cisco consider a frequent occurrence of SBE on 12000 line cards?

Below module did have one recurring log

but month apart.

FRU: Linecard/Module: 4OC48E/POS-SR-SC=

Processor Memory: MEM-LC4E-512=

Packet Memory: MEM-LC4E-PKT-512=

SLOT 7:Jul 28 03:35:50.948 PDT: %RX192-6-ERRINTR: status = 0x2000000, mask = 0x7EFFFFFF - Parity error on rx_adj_mem.

SLOT 7:Jul 28 03:35:50.948 PDT: %RX192-6-ADJ_MEM_SOFT: phy addr 0x790C6E70, offset 0x18DCE, old ecc 0x0, new ecc 0x16, bit 16, value 0x10000 - Detected and Corrected Adjacency Memory Parity Error..

SLOT 7:Aug 26 23:24:01.776 PDT: %RX192-6-ERRINTR: status = 0x2000000, mask = 0x7EFFFFFF - Parity error on rx_adj_mem.

SLOT 7:Aug 26 23:24:01.776 PDT: %RX192-6-ADJ_MEM_SOFT: phy addr 0x79558740, offset 0xAB0E8, old ecc 0x0, new ecc 0x29, bit 34, value 0x400000000 - Detected and Corrected Adjacency Memory Parity Error..

SBEs are corrected by the Error Correction Circuit and do not affect functionality of the line card. No action is required for single-bit errors, unless they occur frequently. In this case, it is advisable to replace the line card

1 Reply 1

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Jim,

if I've understood the frequency is one a mounth.

For the moment you can afford this if the frequency of events increases open a request to change the linecard.

Hope to help

Giuseppe

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: