Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

cisco unified communication 520

Please find the attached detail of Our scenario:

we have following devices

1.uc520 2924 Switch

3.Two analouge phone lines came from PBX

4.Rightfax server

5.two cisco ip phones

We want to send Fax over Ip with the help of uc520 for both inbound and outbound.

Currently I am using Cisco Configuration Assistant in keysystem mode and plug analouge phone line in fxo port which comes from PBX.

Now i can call outbound with cisco IP phones.Next steps are

1.connect to right-fax server to UC500

2.fax out to PSTN through the servers

then receive the fax from PSTN on the right-fax server

Rightfax server is a Ip fax server and we are using it as a virtual server and it connects with a cisco switch and rightfax server support T.38 and SIP.DHCP should be disabled on uc520 because in our network already one DHCP is running.

Does any one have idea how to do that ?


Re: cisco unified communication 520

You may try disabling the data dhcp on the UC520 using the command “No ip dhcp pool data”.