Cisco1701 with VWIC-1MFT-G.703

[tsolution]

Hi Friends. I have a Cisco1701 Router and I need to install a VWIC-1MFT-G.703 Card in replacement of BRI Card where's WIC-1ADSL will remain in its place. I am trying with diferent IOS but still couldn't. In fact i have to get an ADSL Connection and G.703 E1 Link both on same router.

Can any one help?

Regards

[Nagaraja Thanthry · Accepted solution]

Hello,

It seems like 1701 does not support Multiflex VWIC cards.

http://www.cisco.com/en/US/products/hw/routers/ps221/products_data_sheet0918

6a0080088715.html

You might have to go to slightly higher platform (At least 1721 which is

modular) to pick and choose the cards on the router.

https://www.cisco.com/en/US/products/hw/routers/ps221/products_data_sheet091

86a00800920ec.html

Hope this helps.

Regards,

NT

[paolo bevilacqua]

You need a minimum of a 1841 to have E1 and ADSL in the same router.

[tsolution]

Thank You NT

Just one more thing i need to ask that if Cisco1721 with 64D/16F 12.4 IOS can support both VWIC-1MFT-G.703 & WIC-1DSL at the same time?

Regards

[Nagaraja Thanthry]

Hello,

Seems like both cards are supported in 1721.

http://www.cisco.com/en/US/prod/collateral/routers/ps221/product_data_sheet0

900aecd8028aa5a_ps5854_Products_Data_Sheet.html

http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186

a00800b6e0f.shtml

http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/instal

lation/guide/oview_ic.html#wp1129978

Make sure that you are running an ADSL image to support the WIC-1DSL card.

http://www.cisco.com/en/US/products/hw/routers/ps214/products_tech_note09186

a00800ae37f.shtml

Regards,

NT

[paolo bevilacqua]

Do not use such an old router.

You will have nothing but trouble.