Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

cisco2811

can not read compact flash card

cannot open flash

6 REPLIES

Re: cisco2811

If you have eject CF(compact Flash) while operations ,this may corrupt CF .If your router is On and operation ,than do not switch OFF your router ,it will run in rommon mode.Try using other working CF ,if it works, otherwise buy new CF from cisco.i hope you have already take backup of your IOS .

New Member

Re: cisco2811

I will have to by new CF from Cisco.

Thanks

Re: cisco2811

Yes ,if it is corrupted.Only you need to find the compatible CF for your router,it is not necessary to buy CF from cisco only.Thrid party Cf are also available ,but find the compatiblity first.

New Member

Re: cisco2811

Is the CF married to the router, so if i by a new CF will it work with my existing router.

Hall of Fame Super Gold

Re: cisco2811

CF is not married and do not need the bought from Cisco. You will find that the in general, memory bought from cisco, is very very expensive.

New Member

Re: cisco2811

it can be a bug too if this happned after restarting the router.. i recieved this advisory on 3rd July 07

FW: Updated Cisco Field Notice: FN - 62573 - Routers (AS5350XM, AS5400XM, C180X, C181X, C1841, IAD2400, C2691, C2800NM, C2801, C3725, C3745, C3800, VG224) Unable to Read CF

http://www.cisco.com/en/US/customer/products/hw/univgate/ps501/products_field_notice09186a008082da01.shtml

hope that helps..

305
Views
0
Helpful
6
Replies