Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco7600 : Send SIP200 OIR messages to syslog

Hello all,

We noticed today that while the SIP200 OIR events are sent to the local logs (buffered), they are not sent to our syslog servers, as the rest of the systems messages.

The missed message was something like:

SLOT 1: Feb 17 13:53:29: %SPA_OIR-6-REMCARD: Card removed from Subslot 1, interfaces disabled

a check on the specific SIP has shown us:

router#sh hw-module slot 1 logging

Syslog logging: enabled (0 messages dropped, 0 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)

No Active Message Discriminator.

No Inactive Message Discriminator.

Console logging: level debugging, 37 messages logged, xml disabled,

filtering disabled

Monitor logging: level debugging, 0 messages logged, xml disabled,

filtering disabled

Buffer logging: level debugging, 37 messages logged, xml disabled,

filtering disabled

Exception Logging: size (4096 bytes)

Count and timestamp logging messages: disabled

Persistent logging: disabled

etc...

The router syslog config is smth. like this:

logging facility local6

logging source-interface Loopback0

logging x.x.x.x

Am i missing something here? Is there a way to enable syslog for the SIP200?

Thanks in advance

1 REPLY
Silver

Re: Cisco7600 : Send SIP200 OIR messages to syslog

You are hitting the bug. PP:SIP200:RP/SP crash on removing SPA from SIP @is_chunk_bad

107
Views
0
Helpful
1
Replies