Re: clear ip route necessary after redistribution change?
I don't know what's Cisco's recommendation is but I can tell you what my experience has been in this regard. In most situations, any changes that I had made, similar to the one that you did, didn't require clearing the ip routes. There has been one or two situations that I had to manually clear the route(s) for the change to take effect.
I strongly believe the router should recognize the change and effect it without any manual intervention but then there may be bugs in the IOS version that's used. Though, the routes should repopulate quickly on clearing them you have to be careful clearing the routes, especially, if it's a high visibility network.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...