Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Clearing a 505 PIX

What command would i use to clear all of the data in a 505 PIX? I want to keep the current IOS, but get rid of the routes and start fresh?

-J

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Clearing a 505 PIX

To set it to factory defaults and keep PIX code issue.

PIX(config)#configure factory-default

or you can define an IP address of your choice for inside interface and all other configuration will be set to factory defaults.

e.g

PIX(config)#configure factory-default 10.10.10.1 255.255.255.0

http://www.cisco.com/en/US/docs/security/pix/pix63/command/reference/c.html#wp1055799

rgds

Jorge

1 REPLY

Re: Clearing a 505 PIX

To set it to factory defaults and keep PIX code issue.

PIX(config)#configure factory-default

or you can define an IP address of your choice for inside interface and all other configuration will be set to factory defaults.

e.g

PIX(config)#configure factory-default 10.10.10.1 255.255.255.0

http://www.cisco.com/en/US/docs/security/pix/pix63/command/reference/c.html#wp1055799

rgds

Jorge

149
Views
0
Helpful
1
Replies
CreatePlease to create content