Looking for some assistance in setting up clocking correctly for the following setup:
(4) T1's - serial 0/0/0, 0/0/1 -- 0/2/0, 0/2/1
(1) PRI 0/1/1
Currently its configured like this which can't be correct because there is no working connection in 0/1/0
clock timezone EST -5
clock summer-time EDT recurring
network-clock-participate wic 0
network-clock-participate wic 1
network-clock-participate wic 2
network-clock-select 1 T1 0/1/0 clock timezone EST -5
Thanks