Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

%CMCC-3-PLIM_STATUS

I have received the above mentioned error message on the ASR1000-SIP10. What is the error and how it can be rectified? Kindly note that it was the first time I had started the box and haven't configured anything on it.

The completely Error Message as follows:

*Jul 15 20:14:50.571: %CMCC-3-PLIM_STATUS: SIP1: cmcc: A PLIM driver informational error SPA1 EFC Out of Sync, param 12 param c8

2 REPLIES
Bronze

Re: %CMCC-3-PLIM_STATUS

Regarding the SIP errors, have you tried reseating the SIP10 module? If you have not already tried it. If the errors continue after reseating, you may have to replace the SIP module.

http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/ASR1000/ASRmin.html

New Member

Re: %CMCC-3-PLIM_STATUS

Well the error is gone for now. What I did was I took out the SIP module blew some air on it and re-inserted it and the error was gone. Let's see how long this lasts.

4298
Views
5
Helpful
2
Replies