Background:
ASR1002 with ASR1002-SIP10 - started receiving PLIM status messages
%CMCC-3-PLIM_STATUS: SIP0: cmcc: A PLIM driver informational error SPA1 L2 protocol field offset past packet EOP, block 1b count c
Any insight would be helpful, these error messages have occured 6 times in the last 24hrs and I am aware of the error message and recommended action which is not insightful.
Error Message %CMCC-3-PLIM_STATUS : A PLIM driver informational error [chars], param
block[hex] param count[hex]
Explanation A physical layer interface module (PLIM) HyperTransport (HT) driver I/O has failed. This error could be caused by a hardware defect or an HT driver defect.
Recommended Action Examine the logs for PLIM or hardware errors.
Mike