Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Command to check RAM size in CISCO 2811 Router

When I opened the casing for 2811 Router, there's a DDR Ram inside with part number SM5723285D8D6CHSE0, when i checked through the Internet, the DDR ram spec is 184P-DDR-256MB-PC2100 ECC;

my question is : is there any way to check the DDR RAM size and spec via using command in hyperterminal, if YES, what are the commands?

2 REPLIES
New Member

Re: Command to check RAM size in CISCO 2811 Router

If its not in production, one way is after you console into the router, do a "reload" command it will show you the router RAM on the 1st one or two lines of booting up.

eg.Copyright (c) 2002 by cisco Systems, Inc.

c3725 processor with 262144 Kbytes of main memory

Else you can use the "sh ver" command

Cheers!

New Member

http://www.cisco.com/c/en/us

http://www.cisco.com/c/en/us/support/docs/field-notices/634/fn63405.html

"show platform"

4698
Views
0
Helpful
2
Replies