I've been having a heck of a time searching the Cisco site for any page that states definitively whether or not compact flash cards, and by inference the compact flash slot, in the 2800 series of routers is hot plug capable or not. There is a warning label on the outside of the chassis directly beneath the compact flash slot that states "Do not remove during network operation". I take that to mean during file transfers to or from the card or during boot, when the image on the card is being accessed. Can anyone point me at documentation that states it clearly one way or the other?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...