I have a 7206-VXR/NPE-G1 router with QOS applied to one of the gig ports. This gig port is subinterfaced and shaped to 100mbps, then a policy map is applied to prioritize voice (LLQ) and uses 'bandwidth' for video and call control.
However I need to get real GIG speed and the 7206 won't do that so I am moving to the 4506 with a Sup V-10GE.
How do I do in the 4506 what I am doing int the 7206 - or can I?
Here is the appropriate 7206 config that I need to have the 4506 do:
class-map match-any Call-Control
match ip dscp cs3
class-map match-any Video
match ip dscp af41
class-map match-any Voice
match ip dscp ef
shape average 99920000
1. Can I subinterface gig ports on the 4506, either on the Sup-V or on the line cards?
2. Can I shape the interface/subinterface and then apply a policy map for LLQ'ing?
3. Can I use 'priority' and 'bandwidth' statements?
I've tried wading through the 4506 documentation, but if someone could translate the 7206 QOS stuff over to the 4506 that would save me a lot of time and headache.
I understand about the dangers of cut and paste and certainly heed your warning about that.
One last question if I may - actually expanding on #1.
The reason I need to subinterface is this gig port is connecting into a Metropolitan Optical Ethernet (MOE) backbone at a gig speed. We have several remote sites which connect into the MOE at only 100mpbs speed so there is a speed miss-match. These are all layer-3 routed links with /30 subnets on them.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.