Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Compatibility between 7606 and 7609

A Chairde,

Was wondering can all cards in 7609 fit into 7606 Chassis ???

Sounds a bit thick , but as am buying one, I need to make 100% sure ...

Also any differences between chassis that I need to know .....

Assume if SUP Cards are same , the IOS versions will be same also, want to keep as standardized as possible....

1 ACCEPTED SOLUTION

Accepted Solutions
Purple

Re: Compatibility between 7606 and 7609

Hi,

The 7606 gives you 480 Gbps of switching capacity while the 7609 gives you 720 Gbps of switching capacity.

You can inter-change all cards between them. You can run the same supervisors on them and they can run the same version of software.

Hope that helps - pls rate the post if it does.

Paresh

2 REPLIES
Silver

Re: Compatibility between 7606 and 7609

All cards are usable in either chassis. The only difference is the number of slots the chassis can handle.

Steve

Purple

Re: Compatibility between 7606 and 7609

Hi,

The 7606 gives you 480 Gbps of switching capacity while the 7609 gives you 720 Gbps of switching capacity.

You can inter-change all cards between them. You can run the same supervisors on them and they can run the same version of software.

Hope that helps - pls rate the post if it does.

Paresh

197
Views
4
Helpful
2
Replies
CreatePlease to create content