Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

compatible router with HTU-E1 or ASMi52 RAD modem

Can anyone tell me which cisco model is compatible with ASMi52 or HTU-E1 RAD modems. I req. V.35 out put and G703 support

3 REPLIES
New Member

Re: compatible router with HTU-E1 or ASMi52 RAD modem

HI sarvjit - All recent models of cisco routers support V.35 on their serial interfaces and the ASMi52 pair on one side supports V.35 and on the other side connects to carrier mux with G.703 interface.Same is true for HTU-E1 also which is a HDSL modem.

Or are you looking for a WAN interface card with built in CSU/DSU?

HTH

New Member

Re: compatible router with HTU-E1 or ASMi52 RAD modem

hi muhasif, thanks for reply and help me.

basically i am going to install leased line in office and i have not much knowledge of how to install, so want some help or some cost effective solution for leased line components.

isp is using pair of ASMi52 which give output to any router and then router to our network switch.

i want know substitute and cost effective solution to ASMi52 and Cisco router.

thanks again,

sarvjit

New Member

Re: compatible router with HTU-E1 or ASMi52 RAD modem

Ask your ISP if he can extend ethernet to your premises.The Cisco 1841 has 2 FE ports and you can terminate ISP link on 1 port and connect your LAN on the other.In this way you can avoid buying Modems.

As far as cost effective Modem alternative is concerned you can try Patton --- www.patton.com

HTH

787
Views
0
Helpful
3
Replies