Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Compression Card AIM0 is not Compatible with Cisco 3825

Guys,

I have Cisco 3825 having some compatibility problem with its AIM0 slot. I m gonna use hardware compression card i.e AIMR-V2. This card was working with Cisco 2811. Now i moved this to Cisco 3825. After putting it into Cisco 3825 router, card is detecting by the router but AIM0 LED showing Amber light. Which shows the Incompatibility. When i check the SH VER and SH DIAG , there is no Card installed. In my SDM, I am getting the Error of compatibility.

If any one idae.,than revert back

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Compression Card AIM0 is not Compatible with Cisco 3825

Which IOS did had on the 2811, and which do you have on the 3825 ?

3 REPLIES
Hall of Fame Super Gold

Re: Compression Card AIM0 is not Compatible with Cisco 3825

Which IOS did had on the 2811, and which do you have on the 3825 ?

Re: Compression Card AIM0 is not Compatible with Cisco 3825

THere are 2 AIM slots in a 3825. Can you try installing the same on the other slot and check?

Narayan

New Member

Re: Compression Card AIM0 is not Compatible with Cisco 3825

Yes I tried with both AIM slots. Not workign on both slots.

Let me check the compatibility chart also.

415
Views
0
Helpful
3
Replies