Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Config restoration in 6509 Cisco Switch

Hi, I have one 6509 series cisco switch having one Sup card. The problem is SUP is failed and I have replaced the new sup.

Now I have to restore the configuration in Sup having many passwords for EIGRP, NTP, HSRP & BGP.

What is the best way to restore so that I can get no any duplicity in the passwords.

Regards,

Rupesh

3 REPLIES

Re: Config restoration in 6509 Cisco Switch

Hi Rupesh,

Check out the below link hope this helps out your query !!

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfa1.shtml

Regards

Ganesh.H

New Member

Re: Config restoration in 6509 Cisco Switch

Hi, this link is for IOS. I have already IOS, I want to copy start-up-cong file. How can I do it.

Re: Config restoration in 6509 Cisco Switch

Hi Rupesh,

On some of the newer IOS versions you can also use the command "copy ftp: startup-config" instead, but if your IOS only supports TFTP you will have to use "copy tftp: startup-config". Now if you have a CAT OS on the 6509, very likly if it's an older 6509, you will have to use the command "write network all" to copy the config to a TFTP server.

and more detail procedure jsut check out the link hopw that helps out your query !!

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00801fc986.shtml

Regards

Ganesh.H

664
Views
0
Helpful
3
Replies
CreatePlease to create content