11-09-2010 04:19 AM - edited 03-04-2019 10:24 AM
i cannot apply QOS to a vlan interface, it says configuration failed and i'm wondering why.
see version of my ios
Cisco IOS Software, 2800 Software (C2800NM-IPBASE-M), Version 12.4(15)T10, RELEASE SOFTWARE (fc3)
any ideas guys... thanks
11-09-2010 04:38 AM
Hi ,
what Qos feature are you trying to apply ?
Dan
11-09-2010 04:46 AM
its a traffic policing QoS configuration.
when i tried putting in service-policy output
11-09-2010 04:48 AM
Policing is not supported per SVI
Here is the list of supported/unsupported features :
Dan
11-09-2010 05:18 AM
i disagree with you on that, i've applied this same policy to some routers in my network and it worked, did a little research and found that it works on
cisco IOS 12.4 (17b), i would conclude that my IOS is not supported for the QoS policy, probably have to use CAR..thanks all the same
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: