Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuration failed on application of QoS to VLAN interface

i cannot apply QOS to a vlan interface, it says configuration failed and i'm wondering why.


see version of my ios


Cisco IOS Software, 2800 Software (C2800NM-IPBASE-M), Version 12.4(15)T10, RELEASE SOFTWARE (fc3)


any ideas guys... thanks

4 REPLIES

Re: Configuration failed on application of QoS to VLAN interface

Hi ,

what Qos feature are you trying to apply ?

Dan

New Member

Re: Configuration failed on application of QoS to VLAN interface

its a traffic policing QoS configuration.


when i tried putting in service-policy output int vl89...i get the configuration failed error

Re: Configuration failed on application of QoS to VLAN interface

Policing is not supported per SVI

Here is the list of supported/unsupported features :

http://www.cisco.com/en/US/prod/collateral/routers/ps5853/prod_white_paper0900aecd8064c9f4_ps5854_Products_White_Paper.html

Dan

New Member

Re: Configuration failed on application of QoS to VLAN interface

i disagree with you on that, i've applied this same policy to some routers in my network and it worked, did a little research and found that it works on

cisco IOS 12.4 (17b), i would conclude that my IOS is not supported for the QoS policy, probably have to use CAR..thanks all the same

1635
Views
10
Helpful
4
Replies
CreatePlease login to create content