Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Configuration of 800 Series for ADSL2+, NAT, Port Forwarding

Hi All,

I am a newbie to the world of Cisco, but am preparing my first 867VAE Router for a replacement of their existing gateway. From a high level I will need to:

  1. Connect to a PPPoA ADSL2+ connection
  2. Port forward external to internal Server (SMTP, HTTPS) with NAT
  3. Allow PPTP VPN from external to inside Microsoft Server
  4. Allow remote administration over telnet or SSH

I will obviously want to keep things as secure as possible, but no need to get carried away with multiple user access as it is a small business.

Any help you can provide would be great - running IOS on version 15.2.

New Member

I'm have a similar

I have a similar requirement for an 851w router.  My IOS version is 12.4.

New Member

How are you going with your

How are you going with your config Anthony? So far I was able to get my DSL service up and going and could browse web from internal. Now I was looking at how I allow various ports from Internet into an internal Server (i.e. Port Forwarding), but do I also have to do something on CBAC/IOS Firewall to allow in?

New Member

That'll do.  The filename

That'll do.  The filename []70-461[/url] of the SEPmacaddress.cnf.xml must be the MAC address of the phone.