Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuration of MPLS circuit alongwith GRE tunnel

Hi Team,

I have one shared MPLS DS3 circuit that having the Bandwidth of 9 Mbps that have been configured on our central site (Router-Cisco 3845). There are three remote sites which are connected to this central site through the MPLS circuit. All the three sites connected to this central site with the different bandwidth i.e.1.5 Mbps, 6.144 Mbps, and 4.612 Mbps. Moreover, I am creating the GRE tunnel between the central to each remote site.

Please let us know what exactly the configuration that I need to be done on all the routers including Central router & Remote routers to accomplish this connectivity.

2 REPLIES
New Member

Re: Configuration of MPLS circuit alongwith GRE tunnel

Dear Inderjeet,

You have to create three tunnel interface on central site with source and destination ip address.

on every remote site one tunnel interface is required.

For more info please let me know the ip address used at all the sites (MPLS link).

HTH

Re: Configuration of MPLS circuit alongwith GRE tunnel

Hi Inder

Do you have any specific requirement behind creating different GRE tunnels for the respective locations ?

regds

125
Views
0
Helpful
2
Replies
CreatePlease to create content