Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Configuration of Network Capacity Expansion Service Module

Hi!

Routers A and B have been configured and connectivity between the two sites is ok.

The users at Site B are able to access the server hosted at Site A using https.

However, both routers are equipped with an AIM-TPO-1 NCE service module.

These modules are standalone transport-optimization engines having their with own startup and run-time configurations.

The Transport-Opt-Service-Engine slot/port can be configured with an IP address and the following configurations are also required:

  • service-module ip address
  • service-module ip default-gateway

Should the module on both routers A and B be configured for the communication to be successful?

Is the access to the server faster when using the AIM-TPO-1 module?

Is there a limit to the number of transactions the AIM-TPO-1 can handle?

Please see attached files.

Regards,

Alvin

169
Views
0
Helpful
0
Replies
CreatePlease to create content