Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuration Problems on a 1720 (used as a lns)

We have a 1720 router (12.3) terminating a hanfull (<10) lt2p sessions for a test subdomain for dialup. The problems is that most windows users are unable to browse webpages, view https etc. They also state there connection is also slow.

I have managed a quick fix, by implementing a proxy server for port 80 and https and now they can view these pages and connect with thie i messaging.

We have limited success with drtcp to change the mtu, but this seems the be the best answer so far. I have tried to research the problem and so far have ended up no better then when I started. I know I am missing something but cant put my finger on it.

Is there a way to force all traffic on port 80 etc to go through an external proxy to avoid users having to set a proxy setting in there windows configuration.

On linux if we set the mtu ot 576 we dont have an dramas at all.

This is the current configuration from the router/lns

vpdn enable

vpdn multihop

vpdn aaa attribute nas-port vpdn-nas

vpdn logging

vpdn logging local

vpdn logging tunnel-drop

vpdn history failure table-size 50

vpdn session-limit 100

vpdn ip udp ignore checksum

vpdn search-order domain

vpdn domain-delimiter @ suffix

vpdn domain-delimiter / prefix

!

vpdn-group CNS-dial

accept-dialin

protocol l2tp

virtual-template 1

terminate-from hostname dialport.XXX.XXX

local name L2.dial.XXXXXXXX.XXX

lcp renegotiation on-mismatch

l2tp tunnel password 0 cisco

l2tp tunnel timeout no-session 300

ip mtu adjust

Thanks in advance for you help

2 REPLIES
Silver

Re: Configuration Problems on a 1720 (used as a lns)

What did you change the MTU to ?

New Member

Re: Configuration Problems on a 1720 (used as a lns)

576

114
Views
0
Helpful
2
Replies
CreatePlease to create content